Modern Approaches For Modeling Of Structure-Borne Noise Of The Internal Combustion Engine

Authors

  • Andrey L. Yakovenko Moscow Automobile and Road Construction State Technical University (MADI)
  • Mikhail G. Shatrov Moscow Automobile and Road Construction State Technical University (MADI)
  • Andrey O. Glazkov Moscow Automobile and Road Construction State Technical University (MADI)
  • Sergey M. Kuznetsov Moscow Automobile and Road Construction State Technical University (MADI)
  • Igor V. Alekseev Moscow Automobile and Road Construction State Technical University (MADI)
  • Sergey N. Bogdanov Moscow Automobile and Road Construction State Technical University (MADI)

DOI:

https://doi.org/10.3991/ijoe.v16i07.14547

Keywords:

engine noise, structure-borne noise, noise modeling, AVL EXCITE, noise source

Abstract


The article considers the structure of acoustic radiation of an internal combustion engine and modern technologies for noise research. Models of the internal combustion engine as a source of noise and methods for modeling the design and calculating the structure-borne noise of the engine at different stages of its design are described. The method of the engine structure-borne noise calculating for unsteady operation mode is presented. Differences in the working process of the engine for the transient operation mode are shown. Some results of calculations of diesel engine structure-borne noise for different operation modes using MADI methods and using the AVL EXCITE software are presented

Author Biographies

Andrey L. Yakovenko, Moscow Automobile and Road Construction State Technical University (MADI)

Department of "Heat engineering and automotive engines", associate professor

Mikhail G. Shatrov, Moscow Automobile and Road Construction State Technical University (MADI)

Head of Department of "Heat engineering and automotive engines"

Andrey O. Glazkov, Moscow Automobile and Road Construction State Technical University (MADI)

Department of "Heat engineering and automotive engines"

Sergey M. Kuznetsov, Moscow Automobile and Road Construction State Technical University (MADI)

Department of "Heat engineering and automotive engines"

Igor V. Alekseev, Moscow Automobile and Road Construction State Technical University (MADI)

Department of "Heat engineering and automotive engines"

Sergey N. Bogdanov, Moscow Automobile and Road Construction State Technical University (MADI)

Department of "Heat engineering and automotive engines"

Downloads

Published

2020-06-19

How to Cite

Yakovenko, A. L., Shatrov, M. G., Glazkov, A. O., Kuznetsov, S. M., Alekseev, I. V., & Bogdanov, S. N. (2020). Modern Approaches For Modeling Of Structure-Borne Noise Of The Internal Combustion Engine. International Journal of Online and Biomedical Engineering (iJOE), 16(07), pp. 105–113. https://doi.org/10.3991/ijoe.v16i07.14547

Issue

Section

Short Papers