Measurements in Concentrated Sun using a Remote Controlled Robot

Authors

  • Dan Floroian Transilvania University of Brasov
  • Laura Floroian Transilvania University of Brasov
  • Rachamim Rubin Weizmann Institute of Science
  • Doron Lieberman Weizmann Institute of Science
  • Petru Cotfas Transilvania University of Brasov
  • Daniel Cotfas Transilvania University of Brasov
  • Doru Ursutiu Transilvania University of Brasov
  • Cornel Samoila Transilvania University of Brasov

DOI:

https://doi.org/10.3991/ijoe.v9iS3.2544

Keywords:

remote control, automatic measurements, concentrated sun

Abstract


Nowdays, using the concentrated sunlight is a big issue because the amount of energy is very high and the light is concentrated in a very small area. The main problem in this situation is the heating, and in order to make safe measurements a remote controlled robot is needed. After that, a remote controlled robot will assume the duty of protect the measured sample and to expose it for a precise time to the concentrated sun in order to reduce heating of the sample. For easy operating, and for automatize the process, all the duties, starting with initial conditions, continuing with triggering the measurements, and conditioning the signals and finalizing with data saving must be assured by the robot.

Downloads

Published

2013-04-19

How to Cite

Floroian, D., Floroian, L., Rubin, R., Lieberman, D., Cotfas, P., Cotfas, D., … Samoila, C. (2013). Measurements in Concentrated Sun using a Remote Controlled Robot. International Journal of Online and Biomedical Engineering (iJOE), 9(S3), pp. 50–54. https://doi.org/10.3991/ijoe.v9iS3.2544