Design and Verification of On-Line Monitoring & Controlling System of Tensioner

Authors

  • Li Mingjie
  • Duan Menglan
  • Lin Li
  • Zhang Junliang
  • Ye Mao
  • Cheng Guangming

DOI:

https://doi.org/10.3991/ijoe.v9i2.2597

Abstract


Tensioner for deep water pipe-laying vessel is a type of engineering equipment that is applied in sub-sea pipeline laying. Based on the designed tensioner body for S-lay vessel, with the capacity of 200t and can meet the requirements of 3000m water-depth pipe-laying, the corresponding monitoring and controlling system need to be designed. Firstly, the programs of on-line monitoring and controlling system are proposed, and then the software and hardware of the system are designed. In addition, the man-machine interaction interface of the system is developed. This research could provide the guidance for the design of the on-line monitoring and controlling system of 200t tensioner. The test is carried out to verify the functions of the designed on-line monitoring& controlling system. The test results show that the designed system is reliable and also have good maneuverability.

Downloads

Published

2013-04-27

How to Cite

Mingjie, L., Menglan, D., Li, L., Junliang, Z., Mao, Y., & Guangming, C. (2013). Design and Verification of On-Line Monitoring & Controlling System of Tensioner. International Journal of Online and Biomedical Engineering (iJOE), 9(2), pp. 17–20. https://doi.org/10.3991/ijoe.v9i2.2597

Issue

Section

Special Focus Papers